services/nxs-03 · stockpile-cut-fill-volumetrics
NXS-03EARTHWORKS

Stockpile & cut/fill volumetrics

Dense photogrammetry tied to surveyed ground control. Volumes accurate to within 1% — signed, timestamped, and audit-ready.

Request a quote
Volume accuracy
1%
Sites measured
27+
+ DXF + PDF
LAS
Report turnaround
< 72h
Aerial view of an stock pile
METHOD · PHOTOGRAMMETRY + GCP · NXS-03
What you get

Volumes that survive the audit.

A volume number is only as good as its methodology. Every Nexus report ships with the ground control, the surface used, and the algorithm — not just the answer.

Stockpile inventory

Per-pile volume, tonnage (with material density), and footprint. Fits monthly inventory cycles for aggregates and bulk-material yards.

Cut/fill against design

Compare current ground to the design surface — net cut, net fill, balance per zone. Driven by your DXF or LandXML.

Haul-route earthworks

Mass-haul progress for road, pipeline, and rail corridors. Quantities by station.

GCP-tied accuracy

Surveyed ground control on every flight. Sub-cm horizontal, < 3 cm vertical.

Audit packet

Methodology PDF, raw point cloud, and the CAD surfaces — everything a third-party reviewer needs.

Period-over-period

Stack monthly captures to track inventory drift, not just a single snapshot.

Deliverables

Numbers, plus the work behind them.

A volume report is one of seven deliverables — the rest are the evidence.

Volume report
Per-pile or per-zone quantities with method note.
PDF · CSV
Cut/fill heatmap
Color-graded delta against the design surface.
PDF · GeoTIFF
Point cloud
Dense photogrammetry cloud, classified ground / non-ground.
LAS · LAZ
Surface (TIN)
Triangulated current surface, ready for your CAD.
DXF · LandXML
Orthomosaic
Top-down RGB at 2 cm/pixel for context.
GeoTIFF
Methodology letter
Survey control, processing pipeline, and PE-stamp option.
PDF
Spec sheet

What's in the contract before anyone flies.

Capture
Sensor
RGB 20 MP
GSD
2 cm typical
Overlap
80 / 75
Coverage
up to 120 acres
Control
GCPs
5 minimum
Survey grade
RTK + total stn
Datum
NAD83 (CSRS)
CRS
3TM / UTM Zone 11/12
Accuracy
Volume
± 1%
Horizontal
< 1.5 cm
Vertical
< 3 cm
QA
Independent check
Delivery
Turnaround
< 72 hours
Format
PDF · CSV · LAS · DXF
PE stamp
Available
Retention
7 years
Pricing

Fixed-fee. Quoted in advance. No hourly surprises.

Every site is different — your quote depends on size, complexity, and access. These are the starting points so you can budget before the scope call.

Single Survey
Single stockpile, earthworks measurement, or inventory snapshot
From $1,450
CAD
  • On-site flight (1–3 hrs)
  • Surveyed ground control
  • Volume report (LAS + DXF + PDF)
  • Methodology page with uncertainty disclosure
MOST COMMON
Recurring Inventory
Monthly stockpile or aggregate inventory · same site
From $950
CAD per visit
  • Everything in Single Survey
  • Volume-over-time reporting
  • Audit-grade methodology consistency across visits
  • Dedicated specialist contact
Cut/Fill Against Design
Earthworks against design surface · per major milestone
From $2,250
CAD
  • Pre- and post-cut surface comparison
  • Cut/fill volume by design zone
  • Compaction-friendly reporting (subgrade vs finish)
  • Haul-route documentation

All prices in CAD, exclusive of GST. Travel beyond 100 km of YYC may incur a per-diem.

Frequently asked

Everything teams ask before booking.

Aerial image of a 3d stock pile
Recent project

Cascade Aggregates — Brooks quarry

Monthly stockpile inventory across 14 piles and a working face. Replaced a quarterly walking survey; reconciliation against ticketing now closes within 2% on every cycle.

14
Piles measured
12 mo
Engagement
1.7%
Avg ticket variance
Get started

Bring your next site into focus.

Tell us the project, the timeline, and what decisions the data has to support.

Request a quoteSee services →